Have you ever threaded a warp, started to weave and then discovered that you have made a threading error? in the middle of the warp? Do you undo what you have woven so far, and rethread your loom (muttering a few unspeakable utterances as you do so?)
An alternative to rethreading, especially if the error is near the middle of a +700 end warp is to use replacement heddles, tied to the correct shaft. In this particular example, I have incorrectly threaded a pattern sequence, repeating it once too many times – in the middle, of course.read more
How to Weave a Rya Rug on a floor loom. This rya rug is made of 100% hemp warp and weft. The video demonstrates how to cut the rya pile, tie the rya knots and weave the rug.
The backing for the rug is woven in a tabby weave. The pile for the rya knots is cut to a length of about 3 inches. To prepare the cut pile, wrap the rya yarn around a folded piece of cardboard and cut. After the rug has been woven, trim the rya knots to an even length. Weave about an inch of tabby between each row of rya knots.read more
If you have been following some of my posts to our Forum, I had mentioned that I was on a search for a new sewing machine. When I moved to London several years ago, I had purchased a budget sewing machine – a Janome. At the time I knew that I would eventually need to get a better quality machine in order to sew handwovens, but at that time, it met my basic sewing needs.Since I rented a weaving studio at Wimbledon Arts Studios, and have started to weave again, the first warp that came off my loom caused me problems when it came time to hem the edges of the sauna towels that I had woven. The fairly loose twill weave and roughness of the tow linen caused the old sewing machine to choke. The thread constantly broke, or the seam skipped many stitches. So I did a bit of research on the suitability of sewing machines. I was looking for one that would have the power to sew heavier or thicker fabrics, yet could also handle fine silks.read more