Category Archives: Weaving Info

Information,tips and techniques about weaving, warps, looms and textiles.

Vadmal

Vadmal is a woven wool cloth that has been felted. Felting the fabric after weaving, thickens the cloth and makes it wind and water resistant as well as warm. Vadmal is generally woven in a tabby or a twill weave on warp weighted or floor looms.
In order to felt the fabric, there are two methods that can be used. The wet fabric can be pounded in a hammer mill for several hours in order to flatten and thicken the fabric. The hammering process creates a fabric that looks more like “real cloth” and produces a stable fabric with very little nap and the wool keeps its shine. The wool fabric can also be pounded and stamped by placing the fabric in a large bucket filled with water and stamping with your feet. read more

Raanu

A Raanu rug was traditionally a flat weave weft faced handwoven wall hanging that was sometimes also used as a bed covering. The warp is made of cotton rug yarn or sometimes linen yarn, and the weft is woven of multicoloured fine wool yarns, often a single ply. The weave structure is a repp weave and the weft is beaten down firmly so that the warp yarns are fully covered. read more

Hazards of Loom Dust

My studio is filled with weaving looms of many sizes ranging from large floor looms, to 4 shaft table looms, band looms and inkle looms. If you are a weaver, you will have noticed that during weaving, dust bunnies collect under the loom. In the past, I haven’t been too concerned about this except to pull out my vacuum cleaner and clean it up.

Loom Dust
Loom Dust
read more

How to Weave Pickup on a Band Loom

Further to my previous article about weaving pickup on a band loom, there is a quicker method that you can use. Previously, I had woven the pickup by individually picking up each pattern thread by hand. This method works but it is slow and is prone to errors, as it takes a lot of concentration to correctly pick up the pattern thread by thread. read more

How to Warp a Loom Front to Back

I find that warping a loom from the Front to the Back, much faster and easier than the traditional method of warping from Back to Front. You don’t need to use a raddle as the reed separates the warp threads evenly across the loom. I use this warping method quite a lot as I often put on shorter warps (5-6) meters and work with wool, linen and cotton threads with setts ranging from 5 to 30 epi. read more

Paper Yarn Placemats

This pattern is woven in tabby but use different types of yarns giving an interesting effect. The placemats and table runner are woven using 22/2 cottolin for warp. This is woven in a thick/thin rep weave, using paper yarn and hemp single ply tow yarn as the weft. You can substitute the hemp with a single ply linen yarn, a cotton yarn or the same type of cottolin that you used in the warp.

This pattern will make 4 placemats and 1 table runner. read more

Agathis

A few weeks ago I had a lovely holiday in Kassiopi, Corfu. I had visited there a few years ago and had discovered a very talented weaver who has a small shop on the main street of Kassiopi. I was very pleased to see that she is still in business and is doing well. She is expanding her style and line of goods as her daughter-in-law is now learning to weave and is adding some of her own handwoven products to the shop. read more