Sparto (Sparta) Spartium junceum also called Spanish Broom or Weavers Broom is an almost forgotten textile plant that is native to Mediterranean countries. Spanish Broom was introduced to North America and other countries where it has spread in many areas and has become a menace. However, Sparto was once a very useful textile plant.
There are references to weavers broom plants being used for making ropes, footwear, nets, mats, cloth and stuffing for pillows. The flowers are fragrant and can be used for making scented soaps and perfumes. The flowers are also a good source for yellow dyes.
It is thought that the use of Sparto as a textile plant diminished because the fibre is more difficult to process by mechanical means, compared to flax.read more
Madder Root Dye Recipe for Linen, Cotton and Cellulose Fibres
All cellulose fibres, yarns and fabrics must be scoured prior to mordanting or dyeing. Please see my previous article on how to do this. How to Scour Linen
For these samples, I used several different linen and cotton fabrics as well as wool yarn.
Natural Linen (light weight)
Natural Linen (heavy weight)read more
Both flax and hemp are usually sold in roving form or tow, where the flax has been heavily processed into short 2-4 inch lengths. The flax or hemp roving has often been bleached or dyed. This type of flax and hemp are quite easy to spin as a roving, using a short draw. A distaff is not needed to spin this type of flax or hemp. The flax needs a light to medium twist to hold it together. When I spin the flax roving, I spin it wet, as I have a small dish of water beside me, and wet the fiber with my fingers while spinning. This helps to soften the natural pectins in the fibre and smooth the rough ends together.read more
A few days ago, my new Little Brother Electric Drum Carder arrived. It is wonderful and it is a beautiful thing to look at as well as to use. The craftsmanship is superb. The woodwork has all been well made and polished. The motor is surprisingly quiet to operate. I have used electric carders in the past, and after a few minutes of use, the drone of the motor would get very irritating. And it is very easy to use. The carder has a variable speed motor that operates smoothly and easily with a gentle turn of the button. The drum carder also has a reverse function, that makes it simple to remove the completed batt from the back of the drum.
The drum carders come in a range of widths and sizes. I purchased the smaller one – the Little Brother. I has an 8 inch drum width and will make an 8 inch x 22 inch batt. The amount of fibre that it will hold can vary depending on what type of fibre you are using and how well you pack it in while carding. So far, I have managed to card about 50 grams onto the drum, but I think I could add more (perhaps 100 gr) if I card and pack carefully.read more
When I was asked by the AGWSD to teach a workshop on spinning flax this coming summer at their Summer School, I started to do some research on spinning with plant fibres. Never did I expect to fall down such a large rabbit hole! I started by ordering a few small sample packs of different flora fibres, flax, hemp, ramie and a few of the new plant-based fibres such as banana and seacell that have recently come onto the market. I fell in love with the variety and the textures that these plants have to offer. Spinning flora took over in my studio. As I used up my plastic crates filled with wool, they quickly filled up again with a delightful assortment of flora fibres. read more
There are many ways to prepare an indigo vat, some use soda ash and spectralite, some use some use sulphuric acid, some use iron and some urine. For this indigo vat, I am using a fructose base. You can also use ageing fruit instead of fructose sugar.
The fructose indigo vat was developed by Michel Garcia. The addition of the fructose sugar acts as a reducing agent to the Indigo. The sugar removes one of the oxygen molecules from the indigo making it soluble in water.
The addition of the Calcium Hydroxide (slaked or hydrated lime) changes the pH from an acid to a base. The proper pH to get good colour on wool should be about +9 and for cotton and cellulose +10.read more
Bamboo staple fibre is produced mechanically via a retting process, similar to flax production. The woody bamboo stems are crushed and natural enzymes break down the stems so the fibres can be combed out and spun. This is a very labour intensive process.
I have spun bamboo staple fibre before and the fibers were quite long and easy to spin in a worsted spinning style. For this particular batch of bamboo fibre, the fibers are quite short and feel much like cotton. So I decided to use a cotton spinning method. I carded some of the fibre on my drum carder and rolled it into small rolags.read more