# Beginner Weaving – Calculate yarn: bl092599

Even if you have a pre-determined pattern, it is a good idea to double check that you have sufficient yarn to complete your project.

#### Take-up and Shrinkage

To calculate the length of warp required, take the length of your finished project and add 10% – 15% for take-up and shrinkage.

e.g.

• Finished project: Table Runner length = 36″ + 2 inch hems = 40″
• Take up and shrinkage 15% = 6″
• Total length = 46″

#### Loom Waste

You will need additional warp length to be able to tie the warp ends to the back and front of the loom. This is called loom waste. Loom waste is generally about 27″ but I add a full yard for loom waste. This gives me a few additional inches of warp for sampling and playing with new designs or colors.

So, for this project you would need:

46″ + loom waste 36″ = Total 82″ or 2.3 yards warp length.

#### Make More

Because there is always a considerable amount of loom waste in a weaving project, it is usually advisable to make more than 1 item at a time.

To make 2 table runners, the warp length would be:

2 x 46″ = 92″ + loom waste 36″ = 128″ or 3.5 yards.

#### Width of Project

Next, you will need to know the desired width of your project. Add 10% – 15% for take-up and shrinkage.

• Project width: 17″
• Takeup and shrinkage – 15%: 2.5″
• Total width: 19.5″

#### EPI

You will now need to calculate how many ends of yarn you require. Using the sett that you figured out above, multiply the sett (number of ends per inch) times the total width of the project.

• Sett: 20 epi
• Total width: 19.5″
• 18 x 19.5″ = 390 ends

#### Total Warp

Each warp end will be 3.5 yards long and you will need 390 ends. To calculate the total warp length, multiply the total warp length x the total number of ends.

• warp length: 3.5 yards
• # ends: 390
• 3.5 x 390 = 1365 yards

#### YPP

Yarn is usually sold by weight, in number of lbs. or grams. The yardage measurement is sometimes shown on the cone of yarn, or you can ask your yarn supplier how many yards per pound there are in the yarn you purchased. The hemp yarn shown above has 1500 yards per pound (ypp). So you would need 1365/1500 = .9 lb. of yarn for the warp.

Table of Yarn Measurements

#### Weft

Don’t forget that you will need yarn to weave the weft as well. If you are using the same yarn for weft as well, you will need approx. the same amount to complete the two table runners – 1.8 lbs.

Step 1. Choose your project and yarns.

Step 2. Determine the sett of your cloth, or how many threads per inch the fabric will be.

Step 3. Choose the correct Reed

Step 4. Calculate the Yarn requirements.

Step 5. Wind the Warp using a warping board or warping mill.

Step 6. Remove the warp chains and place them on the loom.

Step 7. Sley the Reed.

Step 8. Thread the heddles, following the draft plan.

Step 9. Wind the warp onto the back beam

Step 10. Tie the warp ends to the front beam.

Congratulations! Now you a ready to Weave!

#### Kromski Harp Forte Rigid Heddle Loom  24Inch, GREAT CONDITION!

 \$180.00End Date: Wednesday Apr-11-2018 9:08:22 PDTBuy It Now for only: \$180.00Buy It Now | Add to watch list

#### Vintage Structo gray metal loom 8 harness 8" weaving width

 \$229.99End Date: Tuesday Apr-17-2018 16:00:43 PDTBuy It Now for only: \$229.99Buy It Now | Add to watch list

#### Ashford 10" SampleIt Loom - FREE Shipping

 \$146.00End Date: Thursday Apr-12-2018 12:35:08 PDTBuy It Now for only: \$146.00Buy It Now | Add to watch list