Hemp Rep Weave Placemats - All Fiber Arts
|
|
Hemp Rep Weave Placemats - All Fiber Arts | |
| A free weaving pattern for hemp rep weave placemats. | ||
|
|
|
Warp-face Rep weave (ripsmatta, ripsi) is a weave structure that uses 2 weights of weft yarn, a thick and a thin yarn, woven in tabby, to create a horizontal ribbed design. In a true warp-faced rep, the warp is sett very closely. When woven, the entire weft is covered.
|
 |
| In these hemp placemats, I have used a looser sett, allowing the thick weft to show through. This adds an additional design element to the placemats. The placemats are woven using 2 coloured yarns, alternating in the threading. When woven in tabby, this creates a reversible placemat of different colours.
|
 |
Warp
BorderThe borders on the placemats are approx. 2 inches in width. Use Colour 1 & Colour 2 alternating in the threading.
|
 |
| Threading: Colour 1 - 10 ends (Red) Colour 2 - 10 ends (Burgundy) |
CenterThe warp for the Center of the placemats uses Colour 2 and a natural hemp yarn.
Threading: |
 |
WeftFor the thick weft, you can use a thick cotton mop yarn. Or you can combine several 8/2 cotton or cotton chenille yarns together. These can all be the same colour, or for different colour effects, try mixing several different colours. For the thin weft, use either 1 strand of 8/2 cotton or 20/2 cottolin.Weave in Tabby with 2 shuttles, alternating between thick and thin wefts, to create a ribbed weave effect.
|
FinishingCut the finished warp from the loom and zig-zag stitch the ends to prevent fraying. Wash in warm water and machine dry.Iron the warp and then cut the placemats to 18" lengths. Sew bias tape to finish the edges. |
Related Resources:Vasterbergs Folkhogskola |
|
|
|
| Affiliate Links |
|
EBay CA |
| EBay UK |
| EBay US |
| Amazon US |
| Amazon CA |
| Amazon UK |
| Feature Articles | Newsletter |
|
| All Fiber Arts | All Gluten Free | All Organic Living | All Treks.com | Paivatar |
| ©2001 Paivi Suomi. |
