|
|
| Slide a knitting needle or other stick under the warp threads at the beginning of your woven piece.
|
- Lift up gently on the needle and remove the warp threads from the notches of the box.
- Gently pull on the warp threads and slide the project forward on the loom, leaving the top end of the warp threads in the other notches.
- Adjust the tension on the warp threads if necessary, securing them with tape.
- You are now ready to continue weaving.
|
Weave a Circle |
| Although I haven't done so in this sample project that I wove, you could keep weaving all around the box, creating a complete circle. |
Finishing |
 |
|
Once you have woven the length of project that you wish to have, cut the warp off the loom, leaving a 2 - 3 inch length of warp at each end for the fringe.
Group 2 or 3 warp ends together and secure with an overhand knot. |
More of this Feature |
|
Making the Loom
|
| Weaving the Header |
| Weaving Twill |
| Weaving Clasped Weft |
| Advancing the Warp |
More about Weaving |
| Small Looms
|
|
|
|
|
|